LED strip lights look seamless with the right mounting method.
Low-profile clips keep runs neat and secure.
VHB tape works great on smooth surfaces.
Aluminum channels hide edges, manage wires, and give a built-in finish.
| ATB LED Strip Light Mounting Brackets and Clips |  | Best for Clean Install | Mounting Type: Adhesive or screw clip | Pack Size: 100-pack | Strip Width: 8-10 mm | VIEW LATEST PRICE | Read Our Analysis |
| CANOPUS Heavy Duty Double Sided LED Mounting Tape |  | Best Adhesive Tape | Mounting Type: Double-sided tape | Pack Size: 32 ft roll | Strip Width: Unspecified | VIEW LATEST PRICE | Read Our Analysis |
| Mudder LED Strip Light Clips with Screws |  | Best for Non-Waterproof | Mounting Type: Screw-in clip | Pack Size: 200-pack | Strip Width: Up to 10 mm | VIEW LATEST PRICE | Read Our Analysis |
| Mudder LED Strip Light Mounting Clips with Screws |  | Best Heavy-Duty Clips | Mounting Type: Screw-in clip | Pack Size: 200-pack | Strip Width: Up to 10 mm | VIEW LATEST PRICE | Read Our Analysis |
| ATB Clear LED Strip Mounting Clips (100 Pack) |  | Best Clear Clips | Mounting Type: Adhesive clip | Pack Size: 100-pack | Strip Width: 8-12 mm | VIEW LATEST PRICE | Read Our Analysis |
| Boao LED Strip Light Mounting Clips (200 Pack) |  | Best for Easy Removal | Mounting Type: Screw-in clip | Pack Size: 200-pack | Strip Width: 10 mm | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
ATB LED Strip Light Mounting Brackets and Clips
Should you’re mounting LED strip lights in a vehicle, cabinet, under-counter space, or any indoor-outdoor area that needs a neat, secure hold, ATB LED Strip Light Self-Adhesive Mounting Brackets and Clips are a strong fit. You get 100 clear polypropylene clips, plus 100 screws, so you can choose adhesive or screw mounting. They fit many 8 mm to 10 mm strips, including SMD 5050, 3528, 2835, 5730, and 3014 types, and they also handle small cables. Clean the surface, press the clip, wait 24 hours for full strength, then lock in your strip or wire.
- Mounting Type:Adhesive or screw clip
- Pack Size:100-pack
- Strip Width:8-10 mm
- Water Resistance:IP65 water resistant
- Material:Clear polypropylene
- Cable/Strip Use:LED strips and cables
- Additional Feature:3M VHB adhesive
- Additional Feature:100 screws included
- Additional Feature:24-hour full cure
CANOPUS Heavy Duty Double Sided LED Mounting Tape
Provided that you want a simple, drill-free way to mount LED strip lights, CANOPUS Heavy Duty Double Sided LED Mounting Tape is a strong choice. You get a 0.4-inch-wide, 32-foot clear foam tape that grips plastics, painted or bare finishes, and automotive clear coat. Its two adhesives help it bond securely indoors, outdoors, and in damp spots. You can use it for trim, signage, displays, crafts, and office projects. It’s waterproof, conformable, and resists plasticizer bleed. Whenever you remove it, it won’t leave residue, so you protect your surfaces without screwing or drilling.
- Mounting Type:Double-sided tape
- Pack Size:32 ft roll
- Strip Width:Unspecified
- Water Resistance:Waterproof
- Material:Foam
- Cable/Strip Use:LED strips
- Additional Feature:Residue-free removal
- Additional Feature:Includes box cutter
- Additional Feature:Plasticizer resistant
Mudder LED Strip Light Clips with Screws
Mudder LED strip light clips with screws are a smart pick provided you want a secure, low-profile way to mount non-waterproof 3528 or 5050 strips up to 10 mm wide on wood surfaces like cabinets, wardrobes, or bookcases. You get 200 white one-side clips and 200 screws, so you can space them about 3–6 per meter for a neat hold. The durable, flame-retardant plastic handles indoor use well, and the compact design won’t block much light. Since you can slide the strip out from one side, maintenance is easier, and you won’t have to unscrew every clip.
- Mounting Type:Screw-in clip
- Pack Size:200-pack
- Strip Width:Up to 10 mm
- Water Resistance:Not water resistant
- Material:Plastic
- Cable/Strip Use:LED strips
- Additional Feature:Fire retardant plastic
- Additional Feature:10-year storage stability
- Additional Feature:Opposite-end removal
Mudder LED Strip Light Mounting Clips with Screws
In case you’re mounting non-waterproof LED strips on wood surfaces, Mudder’s 200-piece clip-and-screw kit gives you a simple, secure way to lock them in place without crowding the light. You can use these transparent plastic clips with 3528 or 5050 strips up to 10 mm wide, and the one-side fixing design lets you swap strips without removing the screw. Install about 3–6 clips per meter for cabinets, wardrobes, or shelves. Because they’re compact, they won’t block illumination, and the fire-retardant material adds durability indoors.
- Mounting Type:Screw-in clip
- Pack Size:200-pack
- Strip Width:Up to 10 mm
- Water Resistance:Not water resistant
- Material:Plastic
- Cable/Strip Use:LED strips
- Additional Feature:One-side fixing design
- Additional Feature:High temperature resistance
- Additional Feature:Compact low-profile size
ATB Clear LED Strip Mounting Clips (100 Pack)
ATB Clear LED Strip Mounting Clips are a smart choice should you want a clean, secure way to mount 8mm, 10mm, or 12mm LED strips without bulky hardware getting in the way. You can also use them for IP65 strips like SMD3528, SMD5050, and SMD2835, plus wires and cables under 0.12 inch. Their clear, high-transparency design keeps mounting nearly invisible. With genuine 3M VHB tape, you get strong hold on walls, cabinets, cars, and desks. Clean the surface initially, press for five seconds, and let the adhesive cure for 24 hours.
- Mounting Type:Adhesive clip
- Pack Size:100-pack
- Strip Width:8-12 mm
- Water Resistance:IP65 waterproof compatible
- Material:Clear plastic
- Cable/Strip Use:LED strips and cables
- Additional Feature:Genuine 3M VHB
- Additional Feature:High-transparency clear design
- Additional Feature:Sag-free installation
Boao LED Strip Light Mounting Clips (200 Pack)
Boao LED Strip Light Mounting Clips are a smart pick should you need a neat, secure way to mount 10 mm waterproof LED strips without blocking the light. You get 200 lightweight plastic clips that fit SMD 3528, 3014, 5050, and 5630 strips, plus wires up to 10 mm. Install each clip with one screw, then use the fixed and removable sides for quick removal or maintenance. Place 3 to 6 clips per meter for steady support. They protect against thermal expansion, keep your run tidy, and work well for indoor, outdoor, holiday, signage, and accent lighting.
- Mounting Type:Screw-in clip
- Pack Size:200-pack
- Strip Width:10 mm
- Water Resistance:Waterproof compatible
- Material:Plastic
- Cable/Strip Use:LED strips and wires
- Additional Feature:Flexible durable plastic
- Additional Feature:Thermal expansion protection
- Additional Feature:Neat illumination retention
Factors to Consider When Choosing the Way To Put Up Led Strip Lights
When you choose how to put up LED strip lights, make sure the method matches your strip type and the strip width fits the mount or channel. You’ll also want to consider the surface material and whether you’re installing them indoors or outdoors. Then decide between adhesive or screws based on how permanent and secure you want the setup to be.
Strip Type Compatibility
Before you choose clips, channels, or adhesive mounts, make sure they match your strip’s exact build. Check the strip width first—8 mm, 10 mm, or 12 mm—and use hardware rated for that size so it grips securely without crushing the PCB. Next, confirm whether your strip is waterproof or bare. IP65, IP67, and IP68 strips usually need wider or enclosed mounts because of the silicone coating. Also verify the LED package, such as SMD3528, SMD5050, SMD2835, or COB, so clips don’t press on chips or cast shadows. In the event you’re using high-density or fully encapsulated strips, pick mounts that won’t compress solder points. Finally, check cable and connector clearance so wires can seat cleanly.
Surface Material
The surface you mount LED strip lights on matters just as much as the hardware you choose. Smooth, non-porous materials like glass, metal, and finished wood give you the strongest grip with double-sided tape or self-adhesive clips. Rough, textured, chalky, or freshly painted walls can weaken adhesion, so you might need screws or other fasteners instead. When mounting on untreated wood, concrete, or masonry, moisture can degrade adhesive over time; use mechanical fixing or waterproof adhesive products. Also watch for expansion: metal and plastic can shift with temperature changes and loosen a bond. Before mounting, clean off dust, oil, and residue with isopropyl alcohol, then let the surface dry and stay within the recommended temperature for 24 hours.
Indoor Or Outdoor
Where you install LED strip lights matters just as much as the surface you choose. For dry indoor spaces, you can usually pick IP20 strips, since they’re made for protected areas. Should you be installing in a bathroom, patio, or any spot that gets damp, choose at least IP65 so moisture won’t ruin the run. In case the area gets direct spray, standing water, or possible flooding, go with fully waterproof IP67 or IP68 strips inside sealed enclosures. Outdoor installs also face temperature swings, UV, and weathering, so use UV-stable materials and mounting methods built for those conditions. Consider access too: indoors, you can favor easier-to-remove setups, while outdoor runs often need durable clips or conduit for long-term reliability.
Adhesive Or Screws
Choosing between adhesive and screws comes down to how permanent, exposed, and demanding the install is. Adhesive gives you a fast, drill-free setup and keeps the look clean, so it’s great on smooth, dust-free surfaces whenever you want easy removal later. But you’ll need patience, since many adhesives don’t hit full strength for about 24 hours, and they can let go on oily, dusty, or textured materials. Screws give you the strongest long-term hold, especially outdoors, in vehicles, or anywhere vibration, heat, cold, or moisture can stress the strip. For longer runs, support adhesive with clips or fasteners every 3–6 meters to stop sagging. In case the strip is waterproof, screws can be the safer choice.
Strip Width Fit
Before you pick clips, channels, or adhesive mounts, measure your LED strip’s width—usually 8 mm, 10 mm, or 12 mm—and match it exactly so the strip doesn’t sit loose or bend out of shape. Choose hardware that names the same width, because even a small mismatch can let the strip twist or sag. Check the strip’s profile too: flat strips need a flush channel, while rounded or coated strips need more room so the LEDs stay visible. When you’re using IP65 or IP67 tape, add about 1–2 mm for the silicone jacket. With adhesive mounts, make sure the contact area spans the full width. Leave extra clearance near connectors, solder joints, or controller bumps so everything fits cleanly.
Cable Management Needs
Once you’ve matched the strip width, look at how the cables will run, because the mounting method needs to support both the strip and any attached wires. Measure your strip and cable lengths first, then plan 3–6 mounting points per meter so the run stays straight and connectors don’t take the strain. Use clips or adhesive that fit the wire diameter and strip width without pinching either one. Keep power and data lines tucked away, and steer them with gentle curves that respect the strip’s bend radius. Place removable or screw-fixed mounts near connectors and power supplies so you can service them later. If you’re working in exposed areas, choose water-resistant mounting, use screws where adhesive might fail, and keep power supplies elevated and ventilated.
Moisture Resistance
Should your LED strip lights will face moisture, you’ve got to check the IP rating of both the strip and the mounting hardware initially. In case you expect splashes or condensation, choose at least IP65. For direct immersion, use IP67 or IP68. Mount the strip in fully enclosed channels or in clips made for waterproof strips so you don’t compromise the seal at joints. Pick adhesive tape and mounting surfaces rated for damp or outdoor use, since indoor adhesive can loosen whenever wet. Keep airflow around the strip to limit heat buildup, because trapped moisture and heat speed up corrosion and deteriorate sealants. Finally, use waterproof connectors and seal every penetration with silicone or gaskets so moisture can’t wick into the system.
Frequently Asked Questions
How Do I Hide LED Strip Light Power Cables Effectively?
Tuck the cables behind a sofa or cabinet, run them along baseboards, or place them inside a cable channel. You can also thread them through drilled openings, slip them under rugs, or hide them behind wall trim. Use cable clips and adhesive mounts to keep everything tidy and out of sight.
Can LED Strip Lights Be Dimmed After Installation?
Yes, you can dim them after installation if you use a dimmer, controller, or smart system that matches the strip’s voltage and wiring. With the right setup, you can fine-tune the light level for the space and the moment.
What’s the Best Way to Cut LED Strips Safely?
Turn off the power, measure the strip accurately, and cut only on the marked cut points with sharp scissors. Afterward, seal the exposed ends and test the strip before installing it.
How Do I Connect Multiple LED Strip Sections Seamlessly?
Use solderless connectors or solder joints to join strip sections, then verify polarity before powering up. You can conceal breaks more effectively with matched channels, diffusers, and even spacing, so the hard connection is softened by a continuous glow.
Are LED Strip Lights Safe to Use in Bathrooms?
Yes, LED strip lights can be used in bathrooms if you select strips rated for wet or damp locations, place all connections away from moisture, use a suitable power supply, and follow local electrical codes.